Example shows MCU's temperature measurement with the help of TSENS. Calibration constants for TSENS0 are read from Test Flash and SARADC_B is set to measure Vbg and TSENS outputs. Calculated internal temperature can be displayed on the Terminal.
Motherboard J14 - SCI_RX ON J13 - SCI_TX ON J25 - SCI_PWR ON
See results on PC terminal (19200, 8N1, None). You should see following text (with different values for sure)
TSENS - temperature measurement press any key to continue...
TSENS's calibration constants read from Test Flash