********************************************************************************
Detailed Description:
Configures the FlexCAN 0 to transmit and receive a CAN message
Baudrate to is set to 500kbps.
In this config, RXFIFO is used to receive a messages. 16 filter elements
are defined in the RXFIFO table. Both standard and extended IDs are used.
MB10 is moreover used to receive a message with given standard ID.
MB11 is used to transmit a message upon button press.
The callback function is installed as well and is it called each time message is received
in MB10, RXFIFO or message is transmitted.
NOTE! Termination resistor (120Ohm) have to be placed on transceivers output
12V power supply must be connected.
------------------------------------------------------------------------------
Test HW: DEVKIT-MPC5748G
Maskset: 0N78S
Target : FLASH
Fsys: 160 MHz PLL
********************************************************************************
