********************************************************************************
* Detailed Description:
* This example shows how to use eDMA for transfering 32-bit data from internal flash to SRAM memory as well as how to configure AIPS (peripheral bridge) to grant eDMA access to peripherals.
*
* For closer details on how eDMA works I suggest you to check reference manual as this module is quite complex.
* This example sets system clock for 200MHz running from PLL0 module.
* The constant stored in internal flash is transfered via eDMA to SRAM memory.
* Initialization functions are AIPS_0_Init for peripheral bridge and DMA_0_Init.
*
* ------------------------------------------------------------------------------
* Test HW: MPC57xx Motherboard + MPC5744PE257DC minimodule, MPC5744P,
* silicon mask set 1N65H
* Target : internal_FLASH*
********************************************************************************
