#MCXN547 ethernet

[jeremyyang]

HI Sir , 

We use MCXN547VKLT MCU + KSZ8081RNBIA (PHY ) , 

and need to test 10M Compliance test , After check to Microchip , 

We need set register form MCU to pseudo random pattern ,

DO you know how to set up the Firmware ?@joey

from microship as below 

the test signal need generate from MAC' and through MII/RMII to PHY to generate packets 

[EdwinHz]

Hi @jeremyyang,

Please take a look at the enet example codes that you can find from the MCX-N5XX-EVK SDK. There, you will find the base line on how to configure the ethernet peripheral for the compliance test your require.

BR,
Edwin.

[jeremyyang]

from lab , need configure idle pattern (random Data )

how to configure ?

[jeremyyang]

add test item