We have a SolidRun ClearFog LX2 board and using 100G ethernet through QSFP. Everything works fine but the disconnect/reconnect. If the far side is disconnected/reconnected the link doesn't come up again. "ip link set dev eth1 down/up" doesn't help. "echo dpni.1 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind" doesn't help either. Is there a proven workaround for this issue?
That didn't help. After the change I get the following errors during "ls-addni dpmac.1" fsl_dpaa2_eth dpni.1 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status fsl_dpaa2_eth dpni.1 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
Our original dpc looks like this: mac@1 { link_type = "MAC_LINK_TYPE_FIXED"; };