Flexbus configuration modified in MCUXpresso IDE v24.12 [Build 148] [2025-01-10]

[ChristofAbt]

Hello,

this is an information. Each time if I change something in the Pins perspective and update the code, the following two entries in my flexbus configuration are changed

.byteLaneShift is modified to kFLEXBUS_NotShifted,

and

.portSize is modified to kFLEXBUS_1Byte

It took me a while to find out why my flexbus does not work any more

after having added a pull-up to a pin.

Best regards

Christof Abt

[EdwinHz]

Hi @ChristofAbt,

In order to support you better, could you please share the MCU that you are using?

Also, have you had the opportunity to test this on our newest MCUXpresso IDE release (v25.6)?

[ChristofAbt]

Good morning,

I am using the FRDM-K66F board and the MCOXpresso version 

MCUXpresso IDE v24.12 [Build 148] [2025-01-10]

best regards 

Christof Abt

[EdwinHz]

@ChristofAbt,

Thanks for the information, I recommend updating to the latest version of MCUXpresso (v25.6).

Either way, thanks for reporting your findings on the v24.12 release of the IDE.

BR,

Edwin.