Demo of Flash security control for KV30

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

Demo of Flash security control for KV30

跳至解决方案
648 次查看
jimmyli
Contributor IV

Hi NXP,

        We have plan to control the security status of flash in KV30 by backdoor key technology, and have read the document AN4507 <Using the Kinetis Security and Flash Protection Features.pdf>. 

       Do you have some software DEMOs about backdoor key to enable or disable KV30 flash protection ?

 

       Thanks very much.

标签 (1)
0 项奖励
回复
1 解答
626 次查看
Celeste_Liu
NXP Employee
NXP Employee

Hello @jimmyli ,

Thanks for your post. Please refer to the below post:

How correct use of Backdoor Key in FRDM-KL82Z board - NXP Community

The KL82Z and KV30 are the same when it comes to controlling the flash security status. You can directly refer to this. If you encounter any problems, feel free to ask further questions.

BRs,

Celeste

--------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!
--------------------------------------------------------------------------------------------------------------------

在原帖中查看解决方案

0 项奖励
回复
2 回复数
627 次查看
Celeste_Liu
NXP Employee
NXP Employee

Hello @jimmyli ,

Thanks for your post. Please refer to the below post:

How correct use of Backdoor Key in FRDM-KL82Z board - NXP Community

The KL82Z and KV30 are the same when it comes to controlling the flash security status. You can directly refer to this. If you encounter any problems, feel free to ask further questions.

BRs,

Celeste

--------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!
--------------------------------------------------------------------------------------------------------------------

0 项奖励
回复
504 次查看
jimmyli
Contributor IV
Hi Celeste,
Sorry for replying too late.
Thanks for your solution.
0 项奖励
回复