CodeWarrior and PEmicro Multilink to MCU MKL03Z16VFK4R

[Chalearmrat]

Hi,

 I have MCU MKL03Z16VFK4R and I need to program it on winXP using PEmicro Multilink Universal. According to the information I have gathered, there is CodeWarrior 10.6 that support winXP.

Could you share the CodeWarrior 10.6 software installer?

or, Do you have other software that support winXP?

Thank you

[robert28hull]

Hi,

CodeWarrior 10.6 is quite old, and official installers may no longer be readily available. For the MKL03Z16VFK4R with a PEmicro Multilink Universal, I would recommend checking NXP’s archived CodeWarrior downloads and PEmicro’s legacy software/tools for Windows XP compatibility. If you cannot access the installer, contacting NXP or PEmicro support with the exact MCU and debugger model would be the safest way to obtain a supported legacy package.

[carlos_o]

Hi @Chalearmrat 

Thank you for your post.

There is not an available 10.6 Code Warrior installer you could review the different versions of CodeWarrior available at CodeWarrior Downloads | NXP Semiconductors

The recommended version for Kinetis is CodeWarrior for MCUs 11.1 (that could be used at Windows 11), but it does not include support for KL03.

The KL0x series are supported at MCUXpresso IDE and the SDKs could be downloaded from MCUXpresso SDK Builder