LPC8N04: NFC Hands-on Lab Guide

Document created by Carlos_Mendoza Employee on Nov 15, 2018
Version 1Show Document
  • View in full screen mode

Hello Community!

 

This document is provided as a hands-on lab guide.  The intent of the lab is to demonstrate how to program and use the LPC8N04 development board by using the LPC8N04 board support package demo application and make use of the read, write and energy harvesting capabilities of the NFC tag.

 

Setup
The following items are needed to complete the lab:

 

Software:


•    LPC8N04 Board Support Package MCUXpresso, can be downloaded at this link: https://www.nxp.com/downloads/en/lab-test-software/LPC8N04-MCUXpresso-BSP.zip

 

•    MCUXpresso IDE version 10.2.1, can be installed from here: https://www.nxp.com/mcuxpresso/ide

 

•    LPC8N04 NFC Demo Android application, can be installed at the link below: https://play.google.com/store/apps/details?id=com.nxp.lpc8nxxnfcdemo

 

 

Hardware:


•    LPC8N04 Development Board for LPC8N04 MCU (OM40002): https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc800-series-cortex-m0-plus-mcus/lpc8n04-development-board-for-lpc8n04-mcu:OM40002

 

•    Android Phone with NFC


•    1 Micro USB cable

 

Hope this guide is helpful! Any comments are welcome.

 

Best Regards,
Carlos Mendoza
Technical Support Engineer

1 person found this helpful

Attachments

Outcomes