Example MPC5777M PinToggleStationery S32DS_1.0

[#1]

********************************************************************************

* Detailed Description:

* Application performs basic initialization, setup PLL to maximum allowed freq.,

* start both Z7 cores, interrupts initialization, blinking three LED by interrupts,

* initializes and display notice via UART terminal and then terminal ECHO.

* Each core serves one interrupt and one LED.

*

* The example configures the device for maximum performance by initialization of

* instruction/data cache and enabling of branch prediction for each core

* (startup.s files).

*

* ------------------------------------------------------------------------------

* Test HW:         MPC5777M-512DS, MPC57xx Motherboard

* MCU:             PPC5777MQMVA8 0N78H

* Terminal:        19200-8-no parity-1 stop bit-no flow control on LINFlexD_2

* Fsys:               600MHz

*

* Debugger:        Lauterbach Trace32

*                  PeMicro USB-ML-PPCNEXUS

* Target:          internal_FLASH (debug mode, release mode)

* EVB connection:  USER LED1 connected to P8.0, LED2 connected to P8.1

*                  LED3 connected to P8.2

*

********************************************************************************

[philnguyen]

Thanks,

How do you compile the code? What compiler did you use?

Thanks

Phil