Hi All
I make fsl-image-qt5 in yocto.
make command:
$ MACHINE=imx6slevk source fsl-setup-release.sh -b build -e fb
$ bitbake fsl-image-qt5
However, I couldn't make meta-toolchin-qt5 in yocto.
The error is as follows.
> | WARNING: exit code 1 from a shell command.
> | ERROR: Function failed: do_configure (log file is located at /opt/yocto_build/yocto_fsl-bsp-imx6slevk/fsl-release-bsp/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/qtdeclarative/5.3.2-r0/temp/log.do_configure.3411)
> ERROR: Task 771 (/opt/yocto_build/yocto_fsl-bsp-imx6slevk/fsl-release-bsp/sources/meta-qt5/recipes-qt/qt5/qtdeclarative_5.3.2.bb, do_configure) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 1235 tasks of which 1234 didn't need to be rerun and 1 failed.
> No currently running tasks (1234 of 3376)
>
> Summary: 1 task failed:
> /opt/yocto_build/yocto_fsl-bsp-imx6slevk/fsl-release-bsp/sources/meta-qt5/recipes-qt/qt5/qtdeclarative_5.3.2.bb, do_configure
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
How do you make toolchain include Qt5?
