Trying to remove the U-boot & give control from ATF to MU-Platform-NXP[EDKII] in IMX8MP-LPDDR4-EVK

[mehalap]

I'm trying to remove the U-boot & give control from ATF to MU-Platform-NXP[EDKII]. But facing hang on the iMXNorFlashDxe driver.

Could you have any driver/suggestions to rectify this issue?

Also, Is this possible to remove the U-boot & give direct control to MU-Platform-NXP[EDKII]?

Need to achieve this boot order: U-boot-SPL --> ATF --> MU-Platform-NXP[EDKII].

[Chavira]

Hi @mehalap!

Thank you for contacting NXP Support!

What is MU-Platform-NXP[EDKII]?

If that is a plattform not provided from NXP we cant give you support.

Please see our official documentation in the link below:

https://www.nxp.com/design/design-center/software/embedded-software/i-mx-software/embedded-linux-for...

Best Regards!

Chavira

[mehalap]

Hi @Chavira 

We have downloaded the MU-Platform-NXP[EDKII] from Official NXP Website [https://www.nxp.com/design/design-center/software/embedded-software/i-mx-software/windows-10-iot-ent...] Windows BSP source.

Thanks,

Mehala P