Puh, where did you find a reference to this zip file?
Attached is a setup which worked one time under LPCXpresso, no idea if it can be imported into MCUXpresso.
It is a quick & dirty derivative of a Blinky project for the LPC4330 Xplorer board from NGX Technologies.
The smaller one is the same blinky function, reduced to the minimum. This would be the basis to create an own little LPC4370 project based on MCUXpresso.
In the big project please navigate to the following file: .\Link2_LED1_Blinky\LPC4330-Xplorer_LedToggle\src\ledtoggle.c
to find the short initialization which lets the LED blink. Don't know if all the rest is really used, I just left everything as is, can't remember if it's really required.
Regards,
Bernhard.
