Dear sir, I have a architecture like this
I can`t find TWR-K21F120M USB Device Demo(only CDC), can you give me the USB Device Demo (Bulk mode)?
*Beaglebone USB Host is ready
Thank you very much
Hi,
You can download the KSDK standalone version for the TWR-K21F120M from HERE under the tab Software Development Kits.
The KSDK includes examples for different USB classes, following the path: C:\Freescale\KSDK1.1.0_K21FA_1.0.0\usb\example\device
Please refer to the Integration of the USB Stack and Kinetis SDK document (C:\Freescale\KSDK1.1.0_K21FA_1.0.0\usb\doc) to know how to build an run the examples.
Hope this information can help you
Best Regards,
Adrian Sanchez Cano
Technical Support Engineer
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi,
The KSDK is not supported by CodeWarrior, the IDEs that support KSDK are:
You can find the complete information about the KDS IDE HERE.
Hope this information can help you
Best Regards,
Adrian Sanchez Cano
Technical Support Engineer
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi
Check out http://www.utasker.com/kinetis/TWR-K21F120M.html
(Go to the bottom of the page)
Regards
Mark