CodeWarrior TAP model number

[zwilcox]

I found a CodeWarrior TAP JTAG in my lab.

The CodeWarrior® TAP|NXP webpage lists a few different model numbers/ product family.

I'm not sure what the model number of the one I have in my lab.  I don't see it on the case.  I also, don't see it on the serial conneciton.

Is there a way to find the model number / product family of the CodeWarrior® TAP|NXP ?

[ZhangJennie]

Hi,

Please take some photos of your USB TAP （both sides）then upload it here.

Normally there are labels on the back of USB TAP which tell its type.

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[zwilcox]

Unfortunately, I'm unable to take photographs of work equipment.

The top is identical to the picture on the CodeWarrior® TAP|NXP website.

The bottom has two labels; One that says TDA5879 and another which as the mac address, "MAC 00:04:9F:04:CB:EE"

[yipingwang · Accepted solution]

Hello Zachary Wilcox,

CodeWarrior TAP supports all Digital Networking products.

You need to use different probe tips for different products.

• Probe tip for PowerQUICC II/III, QorIQ MPUs: CWH-CTP-COP-YE
• Probe tip for StarCore DSPs: CWH-CTP-STC-YE
• QorIQ LS processor (Coretex 10 pin) CWH-CTP-CTX10-YE

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[zwilcox]

Got it. Thanks.  That makes sense.