I want to create and measure PWM signals with the RDVCU5775EVM, for which I use as the target, MPC5777C in the configuration block. Apparently, eMIOS is used to measure PWM signals for this target, but I don't see any examples demonstrating this. I would appreciate help finding relevant examples or a new example.
Solved! Go to Solution.
Hello @ranulf ,
We should have an example in our toolbox which covers the input capture functionality. The model name is emios_ic_mpc5777c which uses the mpc5777c as target in the main config block.
Please have a look at this model (also attached) and if this is not what you are looking for, we can discuss and I'll see what I can do.
Hope this helps,
Marius
Hello @ranulf ,
We should have an example in our toolbox which covers the input capture functionality. The model name is emios_ic_mpc5777c which uses the mpc5777c as target in the main config block.
Please have a look at this model (also attached) and if this is not what you are looking for, we can discuss and I'll see what I can do.
Hope this helps,
Marius
The example provided enough information for me to develop code to measure PWM with the RDVCU5775EVM.