On the LS1046ARDB, is the CPLD in the way of the NAND? I see some signal for the NAND go through the CPLD.
Is there any registers to be programmed in the CPLD to enable access to the NAND?
I am having difficulties accessing the NAND on my boot loader.
Cheers,
Renaud
解決済! 解決策の投稿を見る。
There are only two signals go through CPLD: NAND_CS_B and NAND_RB_B and they are statically assigned to ifc_cs0 and ifc_rb0.
There are only two signals go through CPLD: NAND_CS_B and NAND_RB_B and they are statically assigned to ifc_cs0 and ifc_rb0.