I was wondering what the max frequency is for the watchdog on the KE18F MCU. The reference manual has a table to describe the timeout capabilities, and I am confused on the last row of the table on page 716. It says 20MHz (from bus or external). I have my bus clock running at 60MHz. Are these values just examples? Can I run the watchdog up to the bus clock frequency, or will it max out at 20MHz?
解決済! 解決策の投稿を見る。
Hi,
From the RM we know that watch dog's max clock=BUS_CLK
And I make a project , it shows ok.
I hope this help you.
Have a great day,
TIC
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Hi,
From the RM we know that watch dog's max clock=BUS_CLK
And I make a project , it shows ok.
I hope this help you.
Have a great day,
TIC
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Thank you for clarifying that.