Memory validation - MCUX Config tools

[addiyi]

SEMC - SDRAM validation

1. Add a SEMC register initialization component. Start with Memory validation EVK preset or tweak the configuration.
2. Connect the board to PC using COM port and USB HID.
3. Press on Open Validation View to start testing the configuration
4. Run available tests

FlexSPI - NOR validation

1. Add a FlexSPI register initialization component. Start with Memory validation EVK preset or tweak the configuration.
2. Connect the board to PC using COM port and USB HID.
3. Press on Open Validation View to start testing the configuration.
4. Run available tests.

FCB - NOR validation

1. Add a FCB component. Start with Memory validation EVK preset or tweak the configuration.
2. Connect the board to PC using COM port and USB HID.
3. Press on Open Validation View to start testing the configuration.
4. Run available tests.