Hi,
The simpest scatter file mau be found at
c:\Program Files\DS-5 v5.21.0\examples\Bare-metal_boards_examples.zip\DS-5Examples\Freescale-iMX6Q_RAM\scatter.scat
It uses internal RAM of i.MX6. You may change it for external DRAM, just changing
base address from 0x0090_0000 to 1000_0000, assuming initialization script provides
DRAM controller (MMDC) settings.
Regards,
Yuri.
Hello,
Please let me know more details about the problem.
Have a great day,
Yuri
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hello,
The scatter file depends on memory, used by an application.
An example for internal memory (OCRAM) may be found in attachment
of the following thread.
Integrating Processor Expert for i.MX and ARM GCC with Eclipse
General memory map of i.MX6 is described in Chapter 2
(Memory Maps) of the i.MX6 D/Q Reference Manual.
http://cache.nxp.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf
Regards,
Yuri.