[iMX8mm] Cannot find information on how to blow the "disable secure JTAG" fuse

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

[iMX8mm] Cannot find information on how to blow the "disable secure JTAG" fuse

Jump to solution
1,392 Views
mekhall
Contributor II

We would like to blow the SJC_DISABLE and JTAG_SMODE fuses to completely secure the device (iMX8mm) but I wasn't able to find the exact location of those fuses (bank, word, bit). Where can I find this information?

Tags (2)
0 Kudos
Reply
1 Solution
1,378 Views
Harvey021
NXP TechSupport
NXP TechSupport

Hi @mekhall 

Additional detail is emailed to you. If not reaching out you, please let me know.

Best regards

Harvey

View solution in original post

0 Kudos
Reply
5 Replies
1,379 Views
Harvey021
NXP TechSupport
NXP TechSupport

Hi @mekhall 

Additional detail is emailed to you. If not reaching out you, please let me know.

Best regards

Harvey

0 Kudos
Reply
679 Views
jbruno79
Contributor I

Hi @Harvey021 

I need information about the fuses for the imx8m mini. Could you be so kind to provide it to me? I need to disable the JTAG for security reasons.

Best Regards,

Julián

0 Kudos
Reply
1,219 Views
kavita
Contributor I

Hi 

In Imx8mm, Can you please share how to disable the JTAG?

 

 

0 Kudos
Reply
1,373 Views
mekhall
Contributor II
Hello and thanks for replying. The link you e-mailed me does not work: I get an "Access Denied" error message.
0 Kudos
Reply
1,381 Views
mekhall
Contributor II

To clarify: The reference manual states that these fuses should be blown, but the fusemap in the reference manual does not specify where they are located. So it seems that unless I have missed something the reference manual lacks this vital information.

If anyone knows more on this I would be interested to know how to blow these fuses.

0 Kudos
Reply