Good Day iMX community.
This question is regarding Android of Things.
I'm a little desperate. I2S seems not to work on Pico i.MX7Dual.
If I try to play a sound with audioTrack. In the raspberry pi 3 it works without problems, but if I execute it in imx7d it gives me the following error:
audio_hw_primary: card 0, port 0 device 0x1000000
audio_hw_primary: rate 48000, channel 2 period_size 0xc0
audio_hw_primary: can not open pcm_out driver 0: can not set hw params: Invalid argument
The same thing happens with an i2s microphone
This is the code:
final AudioDeviceInfo audioOuputDevice = findAudioDevice(AudioManager.GET_DEVICES_OUTPUTS, AudioDeviceInfo.TYPE_BUS);
int mBufferSize = AudioTrack.getMinBufferSize(44100, AudioFormat.CHANNEL_IN_MONO, AudioFormat.ENCODING_PCM_16BIT);
AudioFormat audioOutputFormat = new AudioFormat.Builder()
.setChannelMask(AudioFormat.CHANNEL_IN_MONO)
.setEncoding(AudioFormat.ENCODING_PCM_16BIT)
.setSampleRate(44100)
.build();
audioTrack = new AudioTrack.Builder()
.setAudioFormat(audioOutputFormat)
.setBufferSizeInBytes(mBufferSize * 2)
.setTransferMode(AudioTrack.MODE_STREAM)
.build();
audioTrack.setPreferredDevice(audioOuputDevice);
audioTrack.setPlaybackRate(44100);
audioTrack.setVolume(AudioTrack.getMaxVolume());
It is not about pins connections (J9: 3,6,10,7), It doesn't matter, connected or unconnected. Same Result
I changed the wav format. Same result too.
Thank you very much!
