HI
I am trying to build Android Images for imx6dl sabresd platform on ubuntu12.04LTS(64-bit OS) . Steps i followed are below:
[1] cd <enter into code directory>
[2] source build/envsetup.sh
[3] lunch sabresd_6dq-user
[4] make
After build, i checked build_sabresd_6dq_android.log to make sure that there does not exist any build error.But, i am getting like below scripts:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
build/core/Makefile:32: warning: overriding commands for target `out/target/product/sabresd_6dq/system/etc/permissions/android.software.live_wallpaper.xml'
build/core/base_rules.mk:520: warning: ignoring old commands for target `out/target/product/sabresd_6dq/system/etc/permissions/android.software.live_wallpaper.xml'
No private recovery resources for TARGET_DEVICE sabresd_6dq
make: *** No rule to make target `kernel_imx/arch/arm/configs/imx6_android_defconfig', needed by `out/target/product/sabresd_6dq/.config'. Stop.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Please, help me to sort out this build error.
Thank You
Kapil Kumar
已解决! 转到解答。
Hi Saurabh
I could able to build it now. Yes, you were right that "imx6_android_defconfig" is missing and not present in kernel_imx/arch/arm/configs.
Now, i am able to build it.
But, one more problem now i am getting . I put my SD-Card into the slot .(u-boot.bin, boot.img, system.img, recovery.img) ,i copied into card using dd utility. Afterthat, i tried booting the board, on hyperterminal
"init:untracked pid ...exited" // this message is coming continuously. and android is flashing on the display of the board.
Thank You
Kapil Kumar.
Hi Saurabh
But, one more problem now i am getting . I put my SD-Card into the slot .(u-boot.bin, boot.img, system.img, recovery.img) ,i copied into card using dd utility. Afterthat, i tried booting the board. on hyperterminal
"init:untracked pid ...exited" // this message is coming continuously. and android is flashing on the display of the sabresdb board.
Thank You.
Kapil Kumar
Hi Kapil
According to your Android build, it requires "imx6_android_defconfig"
Please check that file is available in arch/arm/configs/
While in above steps you are using " imx_v7_android_defconfig"
So go through "Android_User's_Guide.pdf"
Thanks
Saurabh
Hi Saurabh
I could able to build it now. Yes, you were right that "imx6_android_defconfig" is missing and not present in kernel_imx/arch/arm/configs.
Now, i am able to build it.
But, one more problem now i am getting . I put my SD-Card into the slot .(u-boot.bin, boot.img, system.img, recovery.img) ,i copied into card using dd utility. Afterthat, i tried booting the board, on hyperterminal
"init:untracked pid ...exited" // this message is coming continuously. and android is flashing on the display of the board.
Thank You
Kapil Kumar.
Hi Saurabh
How can i verify whether it has been cloned properly or not? I simply downloaded by following the steps given in the Android user guide.
if it has not been cloned properly, then, how i am able to build kernel? Actually, i tried building kernel by the steps outlined below, and i got uImage ready in the folder ~/kernel_imx/arch/arm/boot/uImage.
Steps:
[1]
make imx_v7_android_defconfig
[2]
make uImage LOADADDR=0x10008000
Thank You
Kapil Kumar.