BOOT_CFG[6:4] on iMX8M Mini

[antonio_santagi]

Hello,

on the reference manual for iMX8M Mini I can find on 6.1.5.4.1 Expansion Device eFuses configuration that : 

does this mean that for eMMC BOOT_CFG[6:4] should be 001 binary in any case?

If we have eMMC bus width 8 bit, should it mean that would be 010 binary for BOOT_CFG[6:4] ? not mentioned in this table but mentioned in fusemap table at 6.43.

thank you 

[antonio_santagi]

OK, thank you.

[AldoG · Accepted solution]

Hello,

Please refer to table 6.43 for this configuration, it have complete information for the bit combination, as you have already seen.

Best regards,
Aldo.