We designed the IMX8 mini motherboard according to the reference materials on NXP official website. During the debugging process, we found that the motherboard did not start normally after downloading the program, and still entered the upgrade mode. We checked the configuration of boot0-boot1 mode and the circuit was consistent with the reference design
Hi
one can check hardware using
i.MX 8M Mini Hardware Developer’s Guide
and memory using below memory test link, please also look at
Chapter 4 How to bring up a new MX8MSCALE board MSCALE_DDR_Tool_User_Guide.pdf
document included in package
i.MX8 MSCALE SERIES DDR Tool Release (V2.10)
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------