How to enable BT on i.MX 6SoloLite EVK Board

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

How to enable BT on i.MX 6SoloLite EVK Board

How to enable BT on i.MX 6SoloLite EVK Board

Here is the explaination of relationship of SD-CAN, SD-MAN, 6233, 6003, 3002:

  • AR6003 + AR3002 = AR6233
  • AR6233 + RF Components = SX-SDMAN-2830S
  • SX-SDMAN-2830S + SDIO CONN = SX-SDCAN-2830BT

RLS.PNG

  • SX-SDCAN-2830BT card is inserted into SD3 slot.
  • BT adaptor board (attached files) is inserted into SD1 slot.
  • SX-SDCAN-2830BT card is connected with BT adaptor board via 20-pin FFC.
  • Software: signals of SD1 are muxed into UART4 and GPIO for BT application.

SLEVK.PNG

Below is the description of IO mux on SD1:

mux.PNG

添付
コメント

Beiduo, could ths document be moved to public community, so that everyone could share?

Yixing

dear beiduo:

      can you  introduction these link like LCD-27839_A.doc todo something。

del , Hello -

Taking the below link into account , do we need such hardware changes to do in the SoloLite EVK , ?

How to enable BT on board imx6q_sabresd RevC.

Let me know your views on this.

--Pankaj Rana

del

Hi pankajrana,

No HW rework is need on SL EVK board.

You just need the additional "BT adaptor board" and proper S/W.

del

Hi Yixing,

I think this doc can be public for all.

del

Hi Issta,

Sorry I don't quite understand your meaning......

評価なし
バージョン履歴
最終更新日:
‎06-21-2013 01:44 AM
更新者: