Dear All,
I am following below steps to call auto script in T2080RDB.
1).cd /etc/init.d
2).vi helloworld.sh
#!/bin/sh
echo ""echo "Hello from user!!!"echo ""
3).chmod +x helloworld.sh
4).cd /etc/rc5.d
ln -s ../init.d/helloworld.sh S99helloworld
Then reboot the t2080rdb but linux log does not show Hello from user!!!
Thanks,
Vidya
Dear Pavel,
Yes we are getting, we are using jffs2 file system but after enabling auto script error through "jffs2: Empty flash at 0x0234fffc ends at 0x02350000" many times.
Please tell me what is the issue.
Thanks,
Vidya
I have tested your modified command sequence. See below:
cd /etc/init.d
vi helloworld.sh
ls
banner.sh functions inetd.busybox rc sendsigs syslog.sysklogd
bootlogd functions.initscripts modutils.sh rcS single udev
bootmisc.sh functions.lsbinitscripts mountall.sh read-only-rootfs-hook.sh sshd udev-cache
busybox-cron halt mountnfs.sh reboot stop-bootlogd umountfs
checkroot.sh helloworld.sh netperf rmnologin.sh sysfs.sh umountnfs.sh
devpts.sh hostname.sh networking run-postinsts syslog urandom
dmesg.sh hwclock.sh populate-volatile.sh save-rtc.sh syslog.busybox xinetd
/etc/init.d# chmod +x helloworld.sh
./helloworld.sh
echo Hello from user!!!echo
cd /etc/rc5.d
ln -s /etc/init.d/helloworld.sh S99helloworld
ls
S01networking S15mountnfs.sh S20netperf S20xinetd S99rmnologin.sh
S09sshd S20hwclock.sh S20syslog S99helloworld S99stop-bootlogd
./S99helloworld
echo Hello from user!!!echo
Check also your root file system.
Are there S99helloworld and helloworld.sh files after reboot.
Have a great day,
Pavel Chubakov
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------