Hello,
I am newbie on S32DS. I am trying to create a new project like File -> New -> New S32DS Project. I couldn't see processors. Something installed wrong way or not installed yet? Waiting for your help.
Thanks in advance
Yunus.
Yunus,
Specifically for KEA there are multiple choices. It's supported by both CodeWarrior for MCUs 10.6 and KDS There is also a standalone flasher available for programming by pemicro:
Regards,
Stan
Hello Stan,
Thank you for your fast reply. Waiting the result of development team.
I got one more question that out of this topic. Which program should I use for programming KEA family processor via U-Multilink? Is there any programming enviroment except S32DS IDE?
Regards,
Yunus.
Hello Yunus,
I got to know the solution.
I need to install S32 Design Studio for Power Architecture IDE, (not S32 Design Studio ARM) that supports MPC5748G controller.
Power Architecture IDE, they are releasing within a week.
Thank you for the alternative option, Codewarrior.
Best,
Vinitha
Hello Yunus,
Thanks for the update.
Regarding system requirements - it's mentioned in the release notes (c:\Freescale\S32_ARM_v1.2\S32DS\Release_Notes\Release_Notes.pdf). See the snippet below.
Anyway in your case I suspect the issue might be caused by an interference with another application/program.
I've informed our development team about the issue so the investigation is in progress.
Stan
3 System Requirements
3.1 Recommended Configuration
2.6GHz Pentium® compatible processor or better
4GB RAM
2GB
400MB on Windows system disk
USB port for communications with target hardware
Ethernet port for communications with target hardware (optional)
3.2 Operational Minimum Configuration
1.8GHz Pentium® compatible processor or better
2GB RAM
2GB
400MB on Windows system disk
USB port for communications with target hardware
3.3 Host Operating System Support
Microsoft Windows 7 32-bit and 64-bit (Home Premium Edition and Professional Edition)
Microsoft Windows 8 32-bit and 64-bit (Home Premium Edition and Professional Edition)
Microsoft Windows 8.1 32-bit and 64-bit (Home Premium Edition and Professional Edition)
Microsoft Windows 10 32-bit and 64-bit (Home and Pro Editions)
Hi Stan,
I have tried to work with another machine and seems same result. Could you please share system requirements of S32DS?
Also, I am sharing the eclipse file with two parts in below.
http://www.megafileupload.com/rVlT/eclipse.zip.001
http://www.megafileupload.com/jx4u/eclipse.zip.002
Waiting news!
Yunus
Hi Yunus,
It seems that something wrong happened during installation.
Could you possibly try to re-install and reboot? Do you have any other machine you can test it with?
If it does not help - could you send us entire zipped eclipse directory (~500MB).
Thanks a lot for your cooperation!
Regards,
Stan
Hi Stan,
Thank you for your interest. I attached the log file below. My OS is Windows 7 professional.
http://www.megafileupload.com/fbpz/log
Yunus