Hi NXP:
I use jtag usb tap to debug T2080 rdb boot, I load rcw by usb tap,
but , the rcw readed by boot is not equal to the rcw loaded by usb tap;
please look up attachment for more detail;
I want to know how to debug boot loaded rcw by usb tap;
thinks a lot!
已解决! 转到解答。
Why in the "Attach" configuration you have enabled initialization script???
Please note that "Attach" should establish connection with already initialized processor - in your case it should be done by U-Boot.
Why in the "Attach" configuration you have enabled initialization script???
Please note that "Attach" should establish connection with already initialized processor - in your case it should be done by U-Boot.
thinks a lot!
now I want to debug uboot by usb tap, using rcw in flash.
while I direct start uboot , the uboot log print rcw is right, and uboot start ok;
but while i use usb tap to debug uboot, using rcw in flash, the uboot can not start ; and uboot log print error(ddr error), please look up attachment
how do i debug uboot using usb tap ?
thinks a lot!
HI ufedor:
I want to debug boot with rcw loaded by usb tap;
but I find the rcw loaded by usb tap can not become effective;
could you tell me how to load rcw by usb tap to debug boot ?
thinks a lot!