Hello together,
I am trying to program an S08RN48, and unfortunately fail doing so.
As this controller isn't in the hcs08_devices.xml, I tried to define it myself.
As I'm not so sure about some parts, and I couldn't find the documentation for it, I asking for your help!
<device family="HCS08Plus" name="MC9S08RN48">
<clock registerAddress="0x3038" type="S08ICSV4" />
<memory type="ram">
<memoryRange start="0x0040" end="0x103F" />
</memory>
<memory registerAddress="0x3020" type="eeprom" sectorSize="2" alignment="1">
<memoryRange start="0x003100" end="0x0031FF" />
</memory>
<memory registerAddress="0x3020" type="flash" securityAddress="0xFF7F" sectorSize="512" alignment="4">
<securityEntryRef ref="HCS08-default-security" />
<memoryRange start="0x004000" end="0x00FFAF" />
</memory>
<soptAddress value="0x3004" />
<sdidAddress value="0x3002" />
<sdid value="0x0040" />
<sbdfrAddress value="0x3001"/>
<flashScripts>
<tclScriptRef ref="HCS08-PTxx-flash-scripts" />
</flashScripts>
<flashProgramRef ref="HCS08-PTxx-flash-program" />
</device>
The memory ranges are ok, but I'm not so sure about the other parts, like flash script, flash security.
I can find the chip already, but am unable to flash it (it starts, but stops after a few seconds - probably the wrong programming script).
Please advise! I don't expect a ready to flash description (though it would be nice), but more the hint in the right direction to get it working! Then I could add RN16, 32 and 60 on my own as well - you never know!
Best regards
Markus
Hello together,
so far I didn't had any success. Has anybody experience in this topic?
I tried some other values/configurations, but didn't get it to run! The PCB is ok, as I am able to program it with another programmer...
I would be very happy for ANY hint!