Hello,
I'm looking for examples or code snippets using MQX dma API (for vybrid M4 core).
Thanks,
Emmanuel
Solved! Go to Solution.
Hello Emmanuel,
Please check the sai_dma_demo example that is located at the below path after install MQX 4.1.
C:\Freescale\Freescale_MQX_4_1\mqx\examples\sai_dma_demo\build\ds5
This example shows the use of the DMA driven SAI driver.
Regards
Sol
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hello Emmanuel,
Please check the sai_dma_demo example that is located at the below path after install MQX 4.1.
C:\Freescale\Freescale_MQX_4_1\mqx\examples\sai_dma_demo\build\ds5
This example shows the use of the DMA driven SAI driver.
Regards
Sol
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
You're right, DMA API is shown in the SAI driver.
Unfortunately, the MQX 4.1 it's not available yet with Timesys environment, I tried it, but it seems to have some conflicts with DMA linux driver (UART console driver stops).
Emmanuel