After building my SDK using:
Then dragging and dropping said zip file into MCUXpresso I get the following message:
"The following items are not supported or not valid SDKs"
I verified the zip file was built for all platforms.
Is there anything else that I should have done?
Hi Lukas,
Here's you can find the result of my request and manifest.xml at the following link:
https://www.evernote.com/l/AE-MLk0ko0lHIb4CELjZZlA9CcjqutEZ8s8
I've included both the importable and non-importable versions for your reference.
Hi Jeff,
Thanks for sharing. Is it possible that you switched two packages by mistake? The FRDM-KE15Z_manifest.xml file you shared is not related to MKV31F512xxx12/FRDM-KV31F device/board, instead it contains data for MKE15Z256xxx7/FRDM_KE15Z.
Also please note that in case of existing SDK packages generated on MCUXpresso SDK web prior to March 22nd, these packages does not support MCUXpresso IDE and has to be regenerated to be able to use them in the MCUXpresso IDE.
Regards,
Lukas
I see that USB stack is not selected on download
this is config
now I will try to reset config and download again
Hello Jeff,
can you share the *_manifest.xml file from the root directory of the SDK package that failed to import into MCUXpresso IDE?
Thank you,
Lukas
Aha... the IDE is confused unless MCUXpresso is the only platform in the zip file.