Hi @yipingwang
I got an error when I try to bitbake nxp-image-real-time-edge v2.6 for ls1028 board;
for the url I try it on my browser and it pops 404 error like down below:
http://etherlab.org/download/ethercat/
it doesn't have this page?
Solved! Go to Solution.
Hello,
The tarball that you need can be found at:
www.nxp.com/lgfiles/updates/other/ethercat-1.5.2.tar.bz2
Regards,
Irene
Hello,
The tarball that you need can be found at:
www.nxp.com/lgfiles/updates/other/ethercat-1.5.2.tar.bz2
Regards,
Irene
Hi @Irene
Yes, I just follow the step as reference menu told.
Did you check the link I post? I think there is no way i can fetch if the link doesn't work.
Let me look into this issue.
Hi, @Irene
Any ideas for my problem?
Which release are you used ? I don’t find “nxp-image-real-time-edge” in our 6.1.22 release.
I'm not the only person who has the same issue.
Please check the link https://github.com/nxp-real-time-edge-sw/yocto-real-time-edge/issues/7
Hi, @Irene
I don't get it what do you mean that you don’t find “nxp-image-real-time-edge”?
According to the reference menu RTEDGEYOCTOUG_Rev2.6 on page 8, Yocto Project build uses the bitbake command.