MCU: Keaz128
IDE:S32DS
Problem: I use input capture function to get hall pulse width.I try to disable the function before MCU go lowpower mode.MCU go wrong if i do not comment out DisableIrqSetPending(FTM1_IRQn).
1.I use FTM2 for PWM and there is no same problem
2.Debug show MCU run away when process DisableIrqSetPending(FTM1_IRQn)
已解决! 转到解答。
Hi
If you step through the debugging, which function will this error appear when calling it? Maybe you can send me the test project so I can debug it.
Best Regards,
Robin