Error in final launch sequence

[liuzhonghuiliu]

Error in final launch sequence Failed to execute MI command: -target-select remote localhost:3333 Error message from debugger back end: localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n. Failed to execute MI command: -target-select remote localhost:3333 Error message from debugger back end: localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n. localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n.

[Robin_Shen]

Hi liuzhonghui,

Would you please show me below information:
what IDS
the version of IDE
what debugger
how did you connect the debug interface

Best Regards,

Robin

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[liuzhonghuiliu]

KDS3.0

Open OCD

OpenOCD - On-board OpenSDA debug interface
running the ARM® mbed™ project CMSIS-DAP
firmware

[Robin_Shen]

Please try to use the latest KDS3.2 IDE and latest firmware application.

If you just started this project, see also: MCUXpresso Software and Tools for Arm Cortex-M cores.
The MCUXpresso SDK, IDE and configuration tools speed development time with highest quality software and tools for Kinetis and LPC microcontrollers.

Best Regards,

Robin

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[josephg]

Robin,

Thank you very much.  I have been working on an error in final launch sequence problem for ten days now.  I reloaded the latest firmware application and BINGO!!!!  My problem was fixed.  Again thank you so much!

[liuzhonghuiliu]

Hi Robin_Shen

我的操作系统是win7 home，IDE是KDS3.2，开发板是TWR-KV58F220M Tower Module，debug时出现

'Lauching hello_world_twrkv58f220m debug' has encountered a problem.

Error in final launch sequence
Failed to execute MI command:
-target-select remote localhost:3333
Error message from debugger back end:
localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n.
Failed to execute MI command:
-target-select remote localhost:3333
Error message from debugger back end:
localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n.
localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n.

文件发送到上，也会发生此类错误，故出现

Error in final launch sequence
Failed to execute MI command

这个问题如何解决？

[Robin_Shen]

请检查TWR-KV58F220M的RESET_B电压是否为稳定的3.3V

另外KDS是否尝试过切换新的workspace？

[liuzhonghuiliu]

Hi Robin_Shen

    监测 TWR-KV58F220M的RESET_B电压一直稳定在3.27V。另外KDS也没有尝试切换到新的workspace。

[Robin_Shen]

尝试将默认板载的OpenOCD切换成PE Micro或者Segger OpenSDA吧。（请从附件下载这些文件）

Best Regards,

Robin

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[liuzhonghuiliu]

好吧！我试试。谢谢！

[liuzhonghuiliu]

Hi Robin_Shen

使用PE Micro，可以debug了！

多谢！

Best Regards！

[liuzhonghuiliu]

谢谢！我试试。

[liuzhonghuiliu]

还是不行！我现在的软件都是最新版本的！

操作系统是win7。IDE是KDS3.2。问题没解决。

Error in final launch sequence
  Failed to execute MI command:
-target-select remote localhost:3333
Error message from debugger back end:
localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n.
    Failed to execute MI command:
-target-select remote localhost:3333
Error message from debugger back end:
localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n.
    localhost:3333: ϵͳÊÔͼ½«Çý¶¯Æ÷ºÏ²¢µ½ºÏ²¢Çý¶¯Æ÷ÉϵÄĿ¼¡£\r\n.