Hi everyone,
I'd like to know if the programming time I measure is correct.
With a BDM clock of 8333 kHz, while entering debug with a 33490 bytes program I get:
launching: 3 s
connecting: 5 s
downloading: 26 s
(CW MCU 10.7, Win7 64bit)
I'm a bit concerned of the downloading time. Is it a normal time? Can you suggest a way to reduce this time?
Thank you very much.
Kind regards,
Alberto Spagnolo
Hi Alberto,
Just saw your question. Yes debugging with download is a pain.
In the past I used a DSC with a built in bootloader and downloaded code over that and then ran the debugger without download and that process was much faster.
Unfortunately the 56F827xx series does not have a bootloader built in.
I am using the 56F82746 and plan on implementing the bootloader in AN4275 to get the same effect (also I want the bootloader for future code updates)
Pete
Hi Peter,
thanks for your feedback.
I agree, debugging with download is a pain and unfortunately my bootloader has to run at 9600 bps because of the application, so it's quite slow anyway.
I think that my best option is to get to the end of this project as soon as possible.
Kind regards,
Alberto