Anyone understand the error message below?
MCF51JM128 Debugging Memory Map
-A memory range from 0x3fe to 0x40f is of "internal" type for display purpose.
-A memory range from 0xc00000 to 0xc0000f is of "internal" type for display purpose.
-A memory range from 0xffff8000 to 0xfffffffc is of "internal" type for display purpose. WARNING: This module is overlapping with module having Comment:"Memory Mapped Reg. Block 4".
-A memory range from 0xffff98a1 to 0xffff98b2 is of "internal" type for display purpose. WARNING: This module is overlapping with module having Comment:"Memory Mapped Reg. Block 3".
-A memory range from 0x0 to 0x1ffff is of "physical" type,therefore accessed directly in device physical memory (0x0-0xffff).
-A memory range from 0x800000 to 0x803fff is of "physical" type,therefore accessed directly in device physical memory (0x0-0xffff).
Thanks, gj
Hello
Sorry, I do not have the hardware available to try this out. So I cannot help further.
I would recommend you to submit a service request for that.
Click here to submit a service request.
CrasyCat