hi, I am new to Codewarrior .I am using MC9S08QE128 micro...

[kudrekod]

hi,
I am new to Codewarrior .I am using MC9S08QE128 microcontroller( in DEMOQE128 Dev board) which has HCS08 CPU.
Can anyone tell me how to write a simple C program for blinking LED ?
LEd is connected to port C pin0.

[kudrekod]

thanks a lot.........................

[UK_CF_FAE]

Hello,

Welcome to the board.

All that you could possibly dream of is contained in the Peripheral Module Quick Reference user guide. Try this link:

http://www.freescale.com/files/microcontrollers/doc/user_guide/QE128QRUG.pdf?fpsp=1

It is always worth checking the product page for the device on www.freescale.com and then opening the Documentation tab.

There is also a software download for the QRUG.

Mark

[kudrekod]

thanks

[bigmac · Accepted solution]

Hello,

I would suggest that you consider obtaining the book -

"HCS08 Unleashed", by Fabio Pereira.

It contains numerous examples of simple C programs, with many specifically intended for the board you are using.  Other example programs may easily be adapted for your board.

Regards,

Mac