enable floating point

[ronen_aharoni]

I have port CodeWarrior 5.1 project to CodeWarrior 10.6 and I forgot to enable floating point so I am getting the following error

ERROR L1822: Symbol _FUFLOAT in file

Is there way to change project setting to enable floating point or I have to create new project ?

[ZhangJennie]

Hi Marius,

from your picture, you use HCS08, to enable floating support in CW10, please follow below screenshot captured in properties setting:

here ansifs.lib, small memory model, IEEE32 for both float and double.

for more lib information, see attached readme file.

can this help you?

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[marius_grigoras]

Hi,

Can you please let me know your SoC/board used? And also the compiler (gcc or our in-house one)?

Thank you,

Marius

[marius_grigoras]

Hi,

From project properties use the settings from bellow picture to modify the FP:

Regards,

Marius

[ronen_aharoni]

Hello Marius

Thanks for helping

However I do not see the CPU section so I cannot do the setting as you describe

Best Regard

[ronen_aharoni]

Thank you Marius

I don't see the CPU section in my project  under setting