Our project use p1010 + 2*H5TQ2G63GFR-RDC(DDR3 512MB) + 16M spi Nor,boot from spi nor.
It can not bootup,we can catch some spi clock,but just few spi clock.
It does not issue a hardware reset request of the SoC by setting RSTCR[HRESET_REQ],so the eSPI loader code
find the BOOT signature.
Why the eSPI loader code do not copy the user code?
Is the spihead.cfg right?
Original Attachment has been moved to: u-boot.spi.zip
Original Attachment has been moved to: spihead.cfg.zip
Are you avare that "u-boot.spi" already contains the header code?
I.e. only this one image has to be written to the SPI Flash?