How long is the retention time of the EEPROM inside the LPC43S37JET100?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How long is the retention time of the EEPROM inside the LPC43S37JET100?

Jump to solution
920 Views
andreacecconell
Contributor I

I need to know the retention time of the EEPROM. I can find only the number of write/erase cycle (>100k) but no info regarding the retention time. 

0 Kudos
1 Solution
650 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi Andrea Cecconelli,

   The retention time of EEPROM inside the LPC43S37JET100 is:

1. Tamb = -40 degree C to +85 degree C, the retention time is at least 20 years.

2. 85 degree C < Tamb <=105 degree C, the retention time is at least 10 years.

Actually, you can find this information in the LPC43S37JET100 datasheet:

http://www.nxp.com/documents/data_sheet/LPC43S5X_S3X.pdf 

page 107,

pastedImage_2.png

Wish it helps you!

If you still have question, please let me know!


Have a great day,
Kerry

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
3 Replies
651 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi Andrea Cecconelli,

   The retention time of EEPROM inside the LPC43S37JET100 is:

1. Tamb = -40 degree C to +85 degree C, the retention time is at least 20 years.

2. 85 degree C < Tamb <=105 degree C, the retention time is at least 10 years.

Actually, you can find this information in the LPC43S37JET100 datasheet:

http://www.nxp.com/documents/data_sheet/LPC43S5X_S3X.pdf 

page 107,

pastedImage_2.png

Wish it helps you!

If you still have question, please let me know!


Have a great day,
Kerry

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

0 Kudos
650 Views
andreacecconell
Contributor I

Hi Kerry, thank you very much.

Da: kerryzhou

Inviato: martedì 21 febbraio 2017 08:50

A: Andrea Cecconelli <andrea.cecconelli@artgroup-spa.com>

Oggetto: Re: - Re: How long is the retention time of the EEPROM inside the LPC43S37JET100?

<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg> NXP Community

Re: How long is the retention time of the EEPROM inside the LPC43S37JET100?

reply from Kerry Zhou <https://community.nxp.com/people/kerryzhou?et=watches.email.thread> in LPC - View the full discussion <https://community.nxp.com/message/879580?commentID=879580&et=watches.email.thread#comment-879580>

0 Kudos
650 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi Andrea Cecconelli,

    You are welcome.

    If you still have question, please let me know!

    If your question is solved, please mark the correct answer to close this case, thank you!


Have a great day,
Kerry

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

0 Kudos