IMXrt1050-EVKB Rev A1 schematics

[martinhowell1]

Hi, I have dug out an IMX1050-EVKB Rev A1 board we used for a project a while back which I want to use for developing a bootloader for a new project that I dont have hardware for yet. The trouble is the serial debug port is not working on it. Its probably just a jumper set incorrectly but I cant find the schematics for this revision of the board. On the latest revision the debug section has been replaced K20 OpenSDA replaced with LPC freelink and none of the jumpers on the new schematic match up with the board I have.

Is it possible to get the rev A1 schematic so I can get the serial debug port working and get on with my project? Dont really want to buy a new EVK board as I will have the real hardware in a couple of weeks.

[adriaanverheij]

@gusarambula. Could you please send me the design files for the IMXRT1050-EVKB Rev A1 as well? Thank you.

[marcusg]

@gusarambula. Same question here. Could you please send me the design files for the IMXRT1050-EVKB Rev A1 ?

Thanks a lot. 

[gusarambula]

Hello @marcusg !

I would need to ask you to please open a service ticket requesting these schematic and our team will gladly provide them for you.

You may open a support ticket on NXP.com on the support section by login with your account.

Regards,
Gustavo

[gusarambula · Accepted solution]

Hello Martin Howell, 

The i.MXRT1050-EVKB Rev A1 schematics are not publicly available but I have opened a service ticker on your behalf to send you this file. Please check your e-mail for more information.

Regards,
Gustavo

[James12]

Hi, gusarambula. The design files of i.MXRT1050-EVKB Rev A1 including schematics and layouts, could you share them with me?