openCV

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 
2,250件の閲覧回数
ronsharp
Contributor I

If anyone has cross-compiled openCV support to an arm (particularly imx6) then please let me know what BSP you used and how you did. Having much trouble with compiling. Most compiles and ports but having trouble with windowing.

Ron


0 件の賞賛
返信
1 解決策
1,094件の閲覧回数
jimmychan
NXP TechSupport
NXP TechSupport
0 件の賞賛
返信
4 返答(返信)
1,094件の閲覧回数
andre_silva
NXP Employee
NXP Employee

www.imxcv.blogspot.com

you can find everything you need there.

regards,

Andre

0 件の賞賛
返信
1,093件の閲覧回数
1990rahulreddy
Contributor IV

@Andre= I have read your Blogs, Can u please write, how to cross compile, .cpp file or run openCV code, on i.MX6. I will helpful for new people..who just enter in world of i.MX6..

0 件の賞賛
返信
1,094件の閲覧回数
andre_silva
NXP Employee
NXP Employee

Hi Rahul,

read this post: http://www.imxcv.blogspot.com.br/2014/02/building-opencv-24x-for-freescales-imx6.html

at the end you can find a sample code link (github) and instructions on how to build, you also can check the makefile inside "src" folder for more information.

regards,

Andre

0 件の賞賛
返信
1,095件の閲覧回数
jimmychan
NXP TechSupport
NXP TechSupport

Please read this.

https://community.freescale.com/docs/DOC-1551

Hope this can help you.

0 件の賞賛
返信