Hello,
We are using i.MX 8X and SCFW version 1.7.1. I would like to know whether the internal RTC's interrupts are enabled by default or if they need to be explicitly enabled via sc_irq_enable. Also, is there a dedicated IRQ handler for those interrupts or do we have to periodically check them via sc_irq_status?
Thank you in advance!
Regards,
Petar
Solved! Go to Solution.
Hi Petar
> whether the internal RTC's interrupts are enabled by defaul..
no
>or if they need to be explicitly enabled via sc_irq_enable.
yes
> is there a dedicated IRQ handler for those interrupt..
no
>or do we have to periodically check them via sc_irq_status?
yes
Best regards
igor
Hi Petar
> whether the internal RTC's interrupts are enabled by defaul..
no
>or if they need to be explicitly enabled via sc_irq_enable.
yes
> is there a dedicated IRQ handler for those interrupt..
no
>or do we have to periodically check them via sc_irq_status?
yes
Best regards
igor
Hello, Igor,
Thank you for the reply! I was also wondering which resource needs to be passed when enabling the RTC interrupts and checking their status?
Best regards,
Petar