Hi ,
Please let me know can I interface silabs Si2168 de-modulator directly to i.MX6solo CSI bus.
TS_DATA[0:7] --> CSI0[12:19]
TS_CLK --> CSI0_PIXCLK
TS_VAL --> CSI0_HSYNC
TS_SYNC --> CSI0_VSYNC
Rgds
Chandra
Hi Chandra
please check 4.11.10.1 IPU Sensor Interface Signal Mapping i.MX6SDL Datasheet
http://cache.freescale.com/files/32bit/doc/data_sheet/IMX6SDLCEC.pdf
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi Igor,
My question here was related to Transport stream interface(DVB-T2) to CSI port possibility with i.MX6solo.
Below is the link of demodulator we are planning to use. We need DVB-T2 interface.
https://www.silabs.com/documents/public/data-shorts/Si2168-D60-short.pdf
Rgds
Chandra