Hello Community?
I am working on freescale MCIMX6DL-SDP board. I want to boot this board with barebox images.
For that I download the barebox-2017.06.1 source code and did the following steps:
1) Exported the path of cross compiler
2)make distclean
3)make imx_v7_defconfig
4) make
After the last step I got the images in barebox-2017.06.1/images folder.
I tried flashing the image for mx6sabresd board by below command:
sudo dd if=barebox-freescale-imx6dl-sabresd.img of=/dev/sdb bs=1 seek=1 && sync
but the board is not booting with these images.
Kindly help me regarding this issue.
Best Regards,
Shree
Hi Shree,
Barebox is not developed by NXP, so we do not provide support. You may contact Barebox team for support, or hopefully someone else in this community who has worked with barebox may comment on this.
If you decide to use our images with uboot and you have any problem or concern we will be happy to help.
Regards,
Carlos