I'm working with a i.MX 8M Plus EVK. My host is a Windows 10 computer.
I've downloaded the file LF_v5.15.71-2.2.2_images_IMX8MPEVK.zip.
I'm following the instructions on this NXP web page: https://www.nxp.com/document/guide/getting-started-with-the-i-mx-8m-plus-evk:GS-iMX-8M-Plus-EVK?sect...
The flash operation fails. Below is the output from powershell:
PS C:\mytemp\uuu> .\uuu.exe LF_v5.15.71-2.2.2_images_IMX8MPEVK.zip
uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.5.125-0-gaeb3490
Wait for Known USB Device Appear...
Error: fail open file: >LF_v5.15.71-2.2.2_images_IMX8MPEVK.zip/uuu.auto
PS C:\mytemp\uuu> ls
Directory: C:\mytemp\uuu
Mode LastWriteTime Length Name
---- ------------- ------ ----
-a---- 1/9/2024 8:14 AM 4713308617 LF_v5.15.71-2.2.2_images_IMX8MPEVK.zip
-a---- 11/17/2023 8:43 AM 1286656 uuu.exe
When I look into the zip file the uuu.auto does not exist but the file uuu.auto-imx8mpevk exists in the top level of the zip file. I've tried this with the board powered on and powered off before I issue the uuu command and get the same results.
Should I be using different parameters?
Thanks,
Doug
Hi @duglew60,
Thank you for contacting NXP Support.
You will need to unzip the file. Then, select a .wic file that you would like to program on your i.MX8M Plus, it can be a multimedia image or full image.
Finally, use the UUU tool to load the image in the EVK.
Here is an example command for UUU tool.
uuu -b emmc_all imx-image-full-imx8mpevk.wic
Have a great day!