Enabling spread spectrum clocking (SSC) on iMX6 to pass EMI testing

[ultra12]

Dear Team,

May I know how to Enable spread spectrum on iMX6 to pass EMI testing.

You have any sample code or reference document which shows how to enable SSC .

Regards

HARI

[Alejandro_Salas]

Hello @ultra12 

You can refer to this post:

https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/enable-the-spread-spectrum/ta-p/1122405

I hope this can helps.

Best regards.

Salas.

[ultra12]

My firmware team says the link provided does not tell how to enable SSC in IMX6. If you have any step by step explanation which helps less experienced people to understand, it's well and good