Discussion on RGMII interface

[niteshsahay]

Hi

The part MCIMX6QP6AVT1AA has which version of RGMII controller as we need to implement the delay on the PCB accordingly.

BR\Nitesh

[niteshsahay]

Hi Igor

In my project i am planning to have MAC to MAC communication (RGMII) with MCIMX6QP6AVT1AA.

Any idea on the pins connected for MAC to MAC communication.

Regards

Nitesh

[igorpadykov]

Hi Nitesh

RGMII controller is the same as in i.MX6DQ with small differencies described

in EB810 sect.13 Peripherals. PCB routing rules are also the same as for i.MX6DQ,

please check Table 62. RGMII Signal Switching Specifications i.MX6DQP Datasheet

http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6DQPCEC.pdf

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

[niteshsahay]

Hi Igor

Thanks for the reply.

But nowhere it is mentioned as which version of RGMII is supported by IMX6DQ.

BR\Nitesh

[igorpadykov]

Hi Nitesh

please look at

Version for RGMII-I/F of i.MX6

~igor

[niteshsahay]

Hi Igor

The discussion sent does not mentions for which IMX6 it is?

BR\Nitesh

[igorpadykov]

Hi Nitesh

it is valid for i.MX6DQ, i.MX6DQP

~igor

[niteshsahay]

Thanks Igor..

Regards

Nitesh