Sensor Toolbox&KwikStick

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

Sensor Toolbox&KwikStick

ソリューションへジャンプ
1,456件の閲覧回数
georgek
Contributor II

Hi,

We want to use your MMA45xQ Sensor Toolbox and connect the sensor boards to the KwikStick board. Is it possible?

Thanks for your advice,

George

0 件の賞賛
1 解決策
1,357件の閲覧回数
TomasVaverka
NXP TechSupport
NXP TechSupport

George,

Sensor toolbox sensor boards are not directly compatible with the TWRPI socket on the KwikStik board.

I would recommend using the TWRPI-MMA845XQ board that is compatible with the KwikStik board:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=TWRPI-MMA845XQ

I have also attached its schematic.


Regards,

Tomas

元の投稿で解決策を見る

0 件の賞賛
2 返答(返信)
1,358件の閲覧回数
TomasVaverka
NXP TechSupport
NXP TechSupport

George,

Sensor toolbox sensor boards are not directly compatible with the TWRPI socket on the KwikStik board.

I would recommend using the TWRPI-MMA845XQ board that is compatible with the KwikStik board:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=TWRPI-MMA845XQ

I have also attached its schematic.


Regards,

Tomas

0 件の賞賛
1,357件の閲覧回数
georgek
Contributor II

Thanks for your prompt reply, Tomas! We will use the the TWRPI-MMA845XQ board.

George

0 件の賞賛